Input/Output Assign; Hdmi Input - Pioneer VSX-534 Manual Del Usuario

1. Input/Output Assign

„ 1. TV Out / OSD
Make settings for TV output and On-Screen Displays (OSD) that appear on the
TV.
Setting Item Default Value
1080p -> 4K Auto
Upscaling
Super Resolution 2
OSD Language English
Impose OSD On
Screen Saver 3 minutes
Setting Details
When using a TV that supports 4K, video signals
input at 1080p can be automatically upscaled to 4K
for output.
"Off": When this function is not to be used
"Auto": When this function is to be used
• Select "Off" if your TV does not support 4K.
When you have set "1080p -> 4K Upscaling" to
"Auto", you can select the degree of video signal
correction from "Off" and between "1" (weak) and
"3" (strong).
Select the on-screen display language from the
following.
(North American models) English, German, French,
Spanish, Italian, Dutch, Swedish
(European, Australian, Asian and Taiwanese
models) English, German, French, Spanish, Italian,
Dutch, Swedish, Russian, Chinese
Set whether or not to display information such as
volume adjustment or switching of input on the TV
screen.
"On": OSD is displayed on the TV.
"Off": OSD is not displayed on the TV.
• OSD may not be displayed depending on the
input signal even if "On" is selected. In this case,
change the resolution of the connected device.
Set the time to start the screen saver.
Select a value from "3 minutes", "5 minutes",
"10 minutes" and "Off".
Contents Connections
≫
„ 2. HDMI Input
Change input assignment between the input selectors and HDMI IN jacks.
Setting Item Default Value
BD/DVD HDMI 1
GAME HDMI 2
CBL/SAT HDMI 3
STRM BOX HDMI 4
67
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
Setting Details
"HDMI 1" to "HDMI 4": Assign a desired HDMI IN
jack to the BD/DVD input selector. If you do not
assign a jack, select "---". To select an HDMI IN
jack already assigned to another input selector,
change its setting to "---" first.
"HDMI 1" to "HDMI 4": Assign a desired HDMI
IN jack to the GAME input selector. If you do not
assign a jack, select "---". To select an HDMI IN
jack already assigned to another input selector,
change its setting to "---" first.
"HDMI 1" to "HDMI 4": Assign a desired HDMI IN
jack to the CBL/SAT input selector. If you do not
assign a jack, select "---". To select an HDMI IN
jack already assigned to another input selector,
change its setting to "---" first.
"HDMI 1" to "HDMI 4": Assign a desired HDMI IN
jack to the STRM BOX input selector. If you do
not assign a jack, select "---". To select an HDMI
IN jack already assigned to another input selector,
change its setting to "---" first.
≫