CONTENTS
Introduction ...........................................................................2
all Models...........................................................................4
GRSDH Models..................................................................4
GRSDS Models ..................................................................4
GRSDS/H Models ..............................................................4
Specifications .......................................................................5
IMPORTANT OWNER INFORMATION
Record the model number, serial number, voltage, and
purchase date of the unit in the spaces below (specification
label located on the back of the unit). Please have this
information available when calling Hatco for service assistance.
Model No.________________________________________
Serial No. ________________________________________
Voltage __________________________________________
Date of Purchase __________________________________
Register your unit!
Completing online warranty registration will prevent delay in
obtaining warranty coverage. access the Hatco website at
www.hatcocorp.com, select the Parts & Service pull-down
menu, and click on "Warranty Registration".
INTRODUCTION
The Hatco Glo-Ray
Merchandising Display Warmers are
®
perfect for holding wrapped sandwiches or boxed pizza on a
buffet line or at temporary serving areas. These warmers hold
hot wrapped products and keep them at optimum serving
temperatures without affecting quality. Pre-focused infrared
heat from above and a thermostatically controlled heated base
extends the holding times of most wrapped food. The infrared
heating elements are guaranteed against burnout and breakage
for two years. These units also feature incandescent lights
along with a cord and plug set(s).
Hatco Glo-Ray Merchandising Display Warmers are products
of extensive research and field testing. The materials used were
selected for maximum durability, attractive appearance, and
optimum performance. Every unit is inspected and tested
thoroughly prior to shipment.
This manual provides the installation, safety, and operating
instructions for Glo-Ray Merchandising Display Warmers.
Hatco recommends all installation, operating, and safety
instructions appearing in this manual be read prior to installation
or operation of the warmer.
Installation ...........................................................................13
General.............................................................................13
Operation .............................................................................14
General.............................................................................14
Maintenance ........................................................................15
General.............................................................................15
Daily Cleaning ..................................................................15
Business
8:00
to 5:00
aM
Hours:
Central Standard Time (C.S.T.)
(Summer Hours [June to September]:
8:00
to 5:00
aM
8:00
to 2:30
aM
Telephone: 414-671-6350
E-mail:
partsandservice@hatcocorp.com
Fax:
414-671-3976 (Parts and Service)
additional information can be found by visiting our web site at
www.hatcocorp.com.
Correct Disposal of this Product
This marking indicates that this product and its electronic
components should not be disposed of with other
commercial waste. To prevent possible harm to the
environment or human health from uncontrolled waste
disposal, recycle responsibly to promote the sustainable
reuse of material resources. To dispose of this product
and its electronic components, contact the supplier where
the product was purchased for environmentally safe
recycling.
2
PM
C.S.T., Monday-Thursday
PM
C.S.T., Friday)
PM
Form No. GRSDCEM1-0514