Urmet 1092/605 Guía Rápida página 13

Ocultar thumbs Ver también para 1092/605:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

In this case, only use the controls described in the manual because improper use of other controls could make
the situation worse. More work may be required by the qualified technician to restore normal working conditions
of the device.
If the device was dropped, subjected to heavy shocks or if the camera packaging was damaged.
If the device performance changes considerably.
Replacement of parts
Make sure that the service technician uses the spare parts specified by the manufacturer or spare parts with equivalent
characteristics when replacements are required. Unauthorised replacements can cause fires, electrical shocks and other
dangers.
Safety checks
After any servicing intervention or repair to the video system, ask the technician to run a safety check to ensure that
everything is working safety.
Precautions
To protect the camera, avoid installing and using it in direct sunlight and keep it away from rain and dust.
Do not touch the zoom lens with your fingers. If needed, use a soft cloth and methylated spirit to remove traces
of dust.
Apply a specific cap to protect the zoom lens when the camera is not in use.
Do not point the camera towards the sun.
Do not point the camera towards sources of bright light. Bright light, like that from a spotlight, can cause
dimming and blurs. A vertical line may appear on the screen. This does not indicate a problem.
Install the camera away from video interference. The pictures could present interference if the leads are
arranged near a TV set or other device. Either move the leads or re-install the device to solve the problem.
Privacy and Copyright
The 1092/605 camera is a CCTV system device. Recording of imagines is subject to the laws in force in your
country. Recording of images protected by copyright is forbidden.
Product users shall be responsible for checking and respecting all local rules and regulations concerning
monitoring and recording video signals. The manufacturing SHALL NOT BE LIABLE for use of this product not
in compliance with the laws in force.
LBT 20137A
13

Publicidad

Tabla de contenido
loading

Tabla de contenido