Electrical Wiring Connection - Daikin FWG05AATNMV1 Manual De Instalación

IMPORTANT: * These values are for information only. They should be checked and selected to comply with local and/or
national codes and regulations. They are also subject to the type of installation and size of conductors.
** The appropriate voltage range should be checked with label data on the unit.
There must be an all pole disconnection in the supply mains with a contact separation of at least 3mm.
Model: FWG05/08/11AAT
FCU 1
CVLV N1 L N
3WV
X1
CHILLER
Model: FWG05/08/11AAF
FCU 1
HVLV N1 CVLV N2 L N
3WV 3WV
X1
CHILLER
Model
Voltage Range**
Recommended time delay fuse*
Power Supply Cable*
Interconnection cable size*
Number of conductors

ELECTRICAL WIRING CONNECTION

FCU 2
CVLV N1 L N
3WV
L
N
X2
!
There must be an all pole
disconnection in the supply
mains with a contact separation
of at least 3mm.
All power line must be from the
same phase.
FCU 2
HVLV N1 CVLV N2 L N
3WV 3WV
L
N
X2
!
There must be an all pole
disconnection in the supply
mains with a contact separation
of at least 3mm.
All power line must be from the
same phase.
FWG05AAT(F)
(A) 2
(mm 2 ) 1.5
(mm 2 )
3
1-9
FCU 3
CVLV N1 L N
3WV
L
N
X3
3WV 3 Way Valve
X1, X2,X3 Relay
Field Supply Wire
FCU 3
HVLV N1 CVLV N2 L
3WV 3WV
L
N
X3
3WV
X1, X2,X3
FWG08AAT(F) FWG11AAT(F)
220V-240V/~/50Hz + !
2
1.5
3
L
N
N
L
N
3 Way Valve
Relay
Field Supply Wire
2
1.5
3