Denon ADV-700 Manual De Instrucciones página 22

[_] SURROUND PLAYBACK
Ii!1___ , -o - ,
• Adjustments using the test tones can only be performed in
the "Auto" mode and are only valid for the Auto decode
Surround modes. The adjusted levels are automatically
stored in the memor
2--
Ii3--
0000
°
®,.®.@.0
Press the TEST TONE button.
TTONE %
Remote control unit
2
Test tones are output from the different speakers. Use
the channel volume adjust buttons to ad ust so that the
volume of the test tones is the same for all the
speakers.
• The channel to be adjusted can be changed using the
CH.SELECT button and the (A and v) cursor
buttons on the remote control unit during the
adjustments using the test tones.
Remote control unit
After adjusting using the test tones, adjust the channel
levels either according to the playback sources or to
suit your tastes, as described below.
Remote control unit
• Even after adjusting using the test tones, the various
channels can be adjusted using the procedure described
below to suit the program source and your preferences.
OOOO
2-- --2
_.® ® .......
_:E),,®+ Q.O
_goo
Select the speaker whose level you want to adjust.
• The channel switches as shown below each time the
button is pressed.
Remote control unit
Adjust the volume level of the selected speaker while
the channel level is displayed.
Remote control unit
• The auto decode surround mode can be used for multi-channel and 2-channel stereo playback in the Dolby Digital, Dolby Pro
Logic i1, and DTS surround modes, according to the input signal's format.
• Here we describe the 2-channel decode mode settings for setting whether to play 2-channel sources as such in the 2-channel
mode or in the multi-channel mode, as well as the settings for the Dolby Pro Logic li mode.
11] 2-channel decode mode settings
• In the auto decode surround mode for the DVD, TV/DBS and V,AUX functions, you can select and set the auto stereo mode for
playing 2-channel sources in 2-channel stereo, or the Pro Logic li mode for using Dolby Pro Logic ii processing to achieve multi-
3--
1
channel playback.
i i
" 3
i i
000_ --1
_®_,_®
_9,,®.Q,,O
--2
Withthefunction setto DVD, TV/DBS or _AUX, select
the auto decode surround mode.
• "AUTO decode"is displayed, thenthe normaldisplay
reappears.
Main unit
FUNCTION
SURROUND
Main unit Remote control unit
Press the SURR.PARA button on the remote control
unit and select the 2-channel decode mode.
I .2-:::-:.. -::E::: i R-.S7 _"
SURR pARA
Remote control unit
This can be selected when the digital input consists
of no signal, PCM signals, Dolby Digital 2-channel
signals, as well as when the analog input is selected.
Select the desired 2-channel decode mode using the
( ( and ) ) cursor buttons on the remote control unit.
• The mode switches as follows each time one of the
buttons is pressed:
A-ST 4-,'- PLIT
(auto stereo mode) (Pro Logic II mode)
Remote control unit
When making parameter settings, the display will
return to the regular condition several seconds after
the last button was pressed and the setting will be
completed.
Surround parameters (1)
(2-channel decode mode)
A-ST (auto stereo) mode
• 2-channel sources are played in 2-channel stereo.
When this mode is selected in the auto decode
surround mode, DVD, BS digital and other multi-
channel sources are played as such with multiple
channels, while CDs and other 2-channel sources are
automatically played in stereo.
For 2-channel Dolby Digital sources decoded in Dolby
Surround, identification signals are used to
automatically process the signals in Dolby Pro Logic II
and play them in the multi-channel mode.
PLI! (Pro Logic ll) mode
• Even 2-channel sources undergo Dolby Pro Logic II
processing and are played in the multi-channel mode.
When this mode is selected in the auto decode
surround mode, DVD, BS digital and other multi-
channel sources are played as such with multiple
channels, and CDs and other 2-channel sources also
automatically undergo Dolby Pro Logic II processing
and are played in the multi-channel mode.
In the Dolby Pro Logic i! mode, "CINEMA", "MUSIC"
or "DOLBY PL" (Pro Logic) can be selected and set.
(See page 23 for setting instructions.)
NOTES:
• The 2-channel decode mode cannot be set when Dolby
Digital 5.1-channel signals or DTS signals are being input.
• The 2-channel decode mode is stored separately for the
DVD, TV/DBS and V.AUX modes. (In the Dolby Pro Logic
i! mode, the "CINEMA", "MUSIC" or "DOLBY PL" (Pro
Logic) mode is also stored in the memory.)
22