MV Agusta BRUTALE CORSA Manual De Usuario página 146

Once the full code has been entered, "CONFIRM-
CODE" appears on the display. Press "OK" for over four
seconds to confirm the code.
If the entered code is recognised by the system,
"VALID CODE" appears. The dashboard display goes
back to "RUN". The engine may be started.
If the entered code is wrong, "NOTVALID CODE"
appears. The system will not let the engine start; the
display goes back to "INSERT CODE". Repeat the code
entry procedure from the start, taking care of setting all
the right digits shown on your MV Code Card. If the
problem persists, contact a MV Agusta licensed service
centre.
OPERATION
- 59 -
4
4