Alpine SEA-8081 Manual De Operación página 162

3.$
1
2
(SEA-8481)
3
1
TX
PANIC
2
(SEA-8481)
4
1
TX
PANIC
2
(SEA-8481)
162
2
ACC
and/et/y
Security
MODE
SET UP
MODE [MANU] AUTO
[AUTO LOCK] [ON] OFF
AUTO UNLOCK [ON] OFF
CAR NUMBER 1ST 2ND
3RD [4TH]
1 2
Security
MODE
SET UP
CHIRP(PRE-WARN) [SHORT] LONG
DURATION [30SEC] 60SEC
[ARMING CHIRP] [ON] OFF
WARNING CHIRP ON [OFF]
1 2
Using the CVA-1000
(sold separately)
Security Set-Up
1 Enter the vehicle.
Turn the ignition switch to the ON
position.
2 Turn on the power of the CVA-1000.
Press and release the EXT2/EXT3 and EXT
SELECT buttons simultaneously.
To change the setup feature 1 , press and
release the TX/PANIC button. To change the
setting of each feature 2 , press and hold the
EXT1/VALET button for at least 2 seconds.
When you are satisfied with the setup of
features in this screen, press and release the
Disarm/Valet switch to turn on and then off
quickly to advance to the next screen.
Note: When you change the car number,
also change the remote control side.
Be sure to press and release the TX/
PANIC button.
Again, to change the setup feature 1 , press
and release the TX/PANIC button. To change
the setting of each feature 2 , press and hold
the EXT1/VALET button for at least 2
seconds.
Press and release the Disarm/Valet switch to
turn on and then off quickly to advance to the
next screen.
English