Alpine SEA-8081 Manual De Operación página 66

1
1
or/ou/o
(SEA-8481)
2 Extension LED
Témoin d'extension
Indicador de extensión
1
TX
PANIC
(SEA-8481)
66
Exiting Valet:
Press and hold the EXT1/VALET button for at
SYSTE
least 2 seconds (when the system is in valet).
"SYSTEM IS DISARMED" will be scrolled 3 times
VALET
on the display of the remote control transmitter.
OR
Turn the Disarm/Valet switch ON (when the
system is in valet and the ignition is OFF) for one
second.
The Extension LED will flash twice, indicating
that the system is out of valet (disarmed).
Notes:
1. When the system is in the valet mode, the
2. When exiting Protected Valet mode, the
Door Lock/Unlock
1
Pressing and releasing the TX/PANIC button
LOCKE
LOCKE
– VALET
while the system is in valet mode will lock and
MODE
unlock the doors. The remote control transmitter
will display the appropriate information once
"LOCKED-VALET MODE" or "UNLOCKED-
UNLOC
UNLOC VALET MODE" is activated.
– VALET
Note: Door Locking and unlocking may be
MODE
Basic Operation
extension LED will illuminate for two seconds
whenever the door is opened or the ignition is
turned off.
system will indicate a violation by blinking the
Extension LED twice every three seconds.
optional. Please consult your Alpine
dealer for more information.
English