Alpine SEA-8081 Manual De Operación página 164

5.^
5
1
TX
PANIC
2
(SEA-8481)
6
1
TX
PANIC
2
(SEA-8481)
164
Security
MODE
SET UP
EXIT DELAY [10SEC] 30SEC
(RELOCK) [OFF] ON
PANIC ARM [OFF] ON
CAR JACK [OFF] ON
PROTECTION
1 2
Security
MODE
SETUP
INPUT
DOOR [ON] OFF
HOOD/TRUNK [ON] OFF
[RADAR] [ON] OFF
IMPACT [ON] OFF
OPTIONAL/RADAR#2 OP [RADAR#2]
OPTIONAL/RADAR#2 [ON] OFF
1 2
Using the CVA-1000
(sold separately)
Security Set-Up (Contin-
ued)
Again, to change the setup feature 1 , press
and release the TX/PANIC button. To change
the setting of each feature 2 , press and hold
the EXT1/VALET button for at least 2
seconds.
Press and release the Disarm/Valet switch to
turn on and then off quickly to advance to the
next screen.
Again, to change the setup feature 1 , press
and release the TX/PANIC button. To change
the setting of each feature 2 , press and hold
the EXT1/VALET button for at least 2
seconds.
Press and release the Disarm/Valet switch to
turn on and then off quickly to advance to the
next screen.
English