Alpine SEA-8081 Manual De Operación página 224

224
English/Français/Español
Remote Control
Transmitter
Battery Replacement
(SEA-8481) (Continued)
Cautions on use of the Remote Control
Transmitter
When following conditions will occur in using
the Remote Control Transmitter, please
change the battery (#CR2032) of the remote
control transmitter.
• Nothing will appear on the display.
• The display is blinking if no operation is
carried out.
• Brightness of the display is extremely low
if no operation is carried out.
• Blinking of the display is interrupted
during operation and reset operation
occurs automatically. Here the reset
operation stands for that the display fully
lights up once and the buzzer sounds two
times.
• The transmission distance becomes short
extremely.
English