Dash Disassembly; Kit Preparation - Metra 99-8241 Instrucciones De Instalación

Dash Disassembly

1. Unclip and remove the
A/C vent panel. (Figure A)
2. Unclip and remove the trim panel
containing the A/C control
and pocket. (Figure B)
3. Remove (4) 10 mm bolts securing
the radio assembly. (Figure C)
4. Remove the (4) Phillips screws
securing the clock/display then
remove the clock/display from
the radio assembly. (Figure D)
Continue to kit assembly
(Figure A)
(Figure B)
(Figure C)
(2) Screws on
TWO
SCREWS
each side
ON EACH
SIDE
Side view
SIDE VIEW
clock/display
CLOCK/DISPLAY-
radio assembly
RADIO ASSEMBLY
(Figure D)
99-8241

Kit Preparation

1. Attach the corresponding bracket
to the radio housing. (Figure A)
2. Attach the clock/display to the
brackets/radio housing assembly
using the factory hardware.
(Figure B)
2
(Figure A)
(Figure B)