Kit Assembly - Metra 99-8241 Instrucciones De Instalación

DIN radio provision with pocket
1. Slide the DIN cage into the radio
housing and secure by bending the
metal locking tabs down.
(Figure A)
2. Slide the aftermarket radio into the
cage and secure. (Figure B)
3. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
4. Reassemble dash in reverse order
of disassembly.

Kit Assembly

(Figure A)
(Figure B)
99-8241
ISO DIN radio provision with pocket
1. Mount the ISO brackets to the
radio with the screws supplied
with the radio. (Figure A)
2. Slide the radio into the radio
opening until the side clips engage.
(Figure B)
3. Snap the trim plate into the radio
housing. (Figure B)
4. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
5. Reassemble dash in reverse order
of disassembly.
3
(Figure A)
(Figure B)