Victron energy Blue Smart IP67 Charger Serie Manual página 20

vii. Bluetooth will now be permanently disabled.
d) Re-enabling Bluetooth
If Bluetooth was disabled using option #2 'Disabled', this is irreversible, and Bluetooth cannot be
re-enabled.
If Bluetooth was disabled using option #1 'Enabled for 30 seconds', it is possible to re-enable
Bluetooth.
To re-enable Bluetooth:
i.
Disconnect AC power and perform a new power-up.
ii. Within the first 30 seconds after power-up (before Bluetooth is disabled), complete initial
Bluetooth pairing and connection using the default PIN code (000000) or the current PIN
code set.
iii. Access the 'device options' by selecting the 'settings' icon (gear) in the top right corner,
then the 'device options' icon (three vertical dots).
iv. Open the 'Product info' page by selecting 'Product info'.
v. In the 'Bluetooth' section, select the dropdown arrow to expand the menu, then select
'Enabled'.
18