Victron energy BlueSolar PWM Serie Manual página 4

1. Connect the battery to the charge regulator - plus and minus.
2. Connect the solar module to the regulator - plus and minus.
3. Connect the load to the charge regulator - plus and minus.
The reverse order applies when deinstalling!
An improper sequence order can damage the BlueSolar Charge Controller!
1. Make sure your battery is charged for the BlueSolar Charge Controller to
recognize the battery type before first installation.
2. The battery cable should be as short as possible to minimize losses.
3. The BlueSolar Charge Controller is only suitable for lead-acid, and LiFePO4
batteries.
The BlueSolar Charge Controller is only suitable for regulating solar modules.
4.
Never connect another charging source to the charge BlueSolar Charge
Controller.
2