Tripp-Lite PDU1415 Manual Del Propietário página 3

Features
Service
Your Tripp Lite product is covered by the warranty described in this manual. A variety of Extended
Warranty and On-Site Service Programs are also available from Tripp Lite. For more information on
service, visit www.tripplite.com/support. Before returning your product for service, follow these steps:
1. Review the installation and operation procedures in this manual to insure that the service problem
does not originate from a misreading of the instructions.
2. If the problem continues, do not contact or return the product to the dealer. Instead, visit
www.tripplite.com/support.
3. If the problem requires service, visit www.tripplite.com/support and click the Product Returns link.
From here you can request a Returned Material Authorization (RMA) number, which is required for
service. This simple on-line form will ask for your unit's model and serial numbers, along with other
general purchaser information. The RMA number, along with shipping instructions will be emailed to
you. Any damages (direct, indirect, special or consequential) to the product incurred during shipment
to Tripp Lite or an authorized Tripp Lite service center is not covered under warranty. Products
shipped to Tripp Lite or an authorized Tripp Lite service center must have transportation charges
prepaid. Mark the RMA number on the outside of the package. If the product is within its warranty
period, enclose a copy of your sales receipt. Return the product for service using an insured carrier to
the address given to you when you request the RMA.
14-02-327-932782.indb 3
Circuit Breaker: If the current drawn by the equipment connected to the PDU
exceeds the Maximum Load Rating, the circuit breaker will trip to prevent possible
damage. When the circuit breaker trips, its plunger will pop up. Disconnect excess
equipment and allow the breaker to cool at least one minute before depressing the
plunger to reset the breaker.
Grounding Lug: Use this screw to connect the PDU to ground.
3
3/25/2014 2:19:14 PM