Din Head Unit Provision - Metra 99-8203 Instrucciones De Instalación

DIN head unit provision

1. Slide the DIN cage into the radio
housing and secure by bending the
metal locking tabs down.
2 Slide the aftermarket radio into the cage
and secure. (Figure A)
3. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
4. Reassemble dash in reverse order
of disassembly.
Kit Assembly 99-8203
5
(Figure A)