Kit Preparation - Metra 99-8203 Instrucciones De Instalación

1. Secure the mounting brackets to the
pocket with (4) #6 x 1/4" Phillip flat
head screws supplied. (Figure A)
2. Mount the pocket to the back of the
radio housing (by holding the housing
upside-down, inserting the right edge
of the pocket into place and pushing
the rest of the pocket onto the lip) and
mount with (2) #8 x 3/8" Phillips pan
head screws supplied.
3. Mount the rear support bracket to the
back of the pocket with (2) #8 x 3/8"
Phillips pan head screws supplied.
Kit Assembly 99-8203

Kit preparation

4
(Figure A)