Din Head Unit Provision - Metra 99-5824CH Instrucciones De Instalación

TRANSIT CONNECT 2010-UP
Locate the factory wiring harness in
1
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
2
Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs down. (Fig. A)
3
Snap the pocket into the bottom
opening of the radio housing.
(Fig. B)
4
Slide the aftermarket head unit into
the cage and secure. (Fig. C)
5
Mount the radio housing assembly
into the sub dash using the supplied
#8 Phillips screws then clip the radio
housing trim panel onto the radio
housing.
99-5824CH KIT ASSEMBLY

DIN HEAD UNIT PROVISION

A
B
C
2