Perpetual Calendar - Timex Navi Ocean Manual De Instrucciones

The date function advances the date between the hours of 10 PM and 2
AM... Avoid setting the date during this timeframe... If you attempt to set the
date during this time period, rotate the crown at a very slow rate to avoid
damaging the watch...
DAY / DATE MODELS
TO SET THE TIME:
1... PULL the crown out to the "C" position...
2... TURN the crown either way to the correct time...
3... PUSH in the crown to the "A" position...
TO SET THE DATE:
1... PULL the crown out to the "B" position...
2... TURN the crown either way to the correct date...
3... PUSH in the crown to the "A" position...
TO SET THE DAY:
1... PULL the crown out to the "C" position...
2... TURN the crown either way for full 24 hour cycle to set day...
3... PUSH the crown in to the "A" position...
TO SET THE BILINGUAL DATE:
If your watch is equipped with a bilingual day display, you may select the
desired language by advancing the day display...
1... PULL the crown out to the "C" position...
2... Repeatedly move the time back to 11pm and forward to 4am until you see
the current day displayed in the desired language...
3... PUSH the crown in to the "A" position...
EASY SET ALARM
HOUR MARKER
ALARM SET
TURNING RING
EASY SET ALARM WITH DATE & INDIGLO
1... From the "A" position, PUSH the TIMEKEEPING CROWN in (towards
the watch case) to activate the INDIGLO
watch dial...
EASY SET ALARM DATE & TIME SETTINGS
TO SET THE DATE:
1... With the TIMEKEEPING CROWN in the "B" position TURN the
TIMEKEEPING CROWN or TURNING RING in either direction to set the
date...
TO SET THE TIME:
1... With the TIMEKEEPING CROWN in the "C" position TURN the
TIMEKEEPING CROWN or TURNING RING in either direction to set the
time...
DATE
A B C
CROWN POSITION
MINUTE MARKER
TIMEKEEPING/INDIGLO NIGHT-LIGHT
®
CROWN. PUSH CROWN TO ACTIVATE
THE INDIGLO ® NIGHT-LIGHT
A B C
POSITION
POSITION
ALARM CROWN
PULL CROWN "OUT" TO
ACTIVATE THE ALARM
NIGHT-LIGHT
®
Night-Light and illuminate the
®
EASY SET ALARM SETTINGS
1... Your easy set alarm watch is equipped with two types of alarms:
2... 12-Hour Alarm: rings OR vibrates twice per day at the desired hour and
minute as long as the alarm is activated... (Alarm crown must be in "E"
position...)
3... Hourly Alarm: rings OR vibrates every hour at the desired minute if
activated... (Alarm crown must be in "F" position...)
TO SET THE 12-HOUR ALARM:
1... With the ALARM CROWN in the "D" position, TURN the ALARM CROWN
or TURNING RING in either direction to set the hour and minute alarm
markers... To activate the alarm to ring or vibrate at the desired time, PULL
the ALARM CROWN out to the "E" position... A single beep sound and
flash, OR a vibration will indicate that the 12-Hour Alarm is activated.
2. The alarm will sound and the dial will flash OR vibrate at the desired time
(hour and minute) and will repeat every twelve hours unless the alarm is
deactivated...
NOTE: Alarm is deactivated when the ALARM CROWN is in the "D" position...
If the alarm is not deactivated it will automatically stop ringing after 20 beeps
and flashes OR stop vibrating, and will resume in 12 hours at the indicated
time...
TO SET THE HOURLY ALARM:
1... With the ALARM CROWN in the "D" position, TURN the ALARM CROWN
or TURNING RING in either direction to set the minute alarm marker...
2... To activate the alarm to ring or vibrate at the desired minute, PULL the
ALARM CROWN out to the "F" position. Three beeps sound and flash OR
a vibration indicates the Hourly Alarm is activated...
3. The alarm will sound and the dial will flash OR vibrate at the desired
minute and will repeat every hour on the specified minute unless the
alarm is deactivated...
NOTE: Alarm is deactivated when the ALARM CROWN is in the "D" position...
If the alarm is not deactivated it will automatically stop ringing after 20 beeps
and flashes OR stop vibrating, and will resume again in one hour at the
indicated minute...

PERPETUAL CALENDAR

Your Perpetual Calendar watch accurately keeps track of how many days
are in each month... It also adjusts for leap years... The date on your watch
(including the month and year) was preset at the factory to Eastern Standard
Time, Greenwich Mean Time or Hong Kong Standard Time (depending on
where you purchased your watch)... You only need to adjust the time...
WED 14
CHECK DATE
(FACTORY USE ONLY)
TO SET TIME
To set time, simply pull crown all the way out and turn... Day and date change
automatically when time is adjusted past midnight; there is no additional step
for setting day or date... Push crown in when done...
After setting, if date changes at noon, time needs to be adjusted ahead or
back 12 hours...
If crown is accidentally put in MIDDLE position and turned, date display will
change temporarily, but date setting is unaffected... Simply pull crown all the
way out and set time... Proper date display will resume...
PERPETUAL CALENDAR WATCH
FREE LIFETIME BATTERY REPLACEMENT**
If the battery needs to be changed, we recommend that only TIMEX replace
it... Your watch will need to be recalibrated to correct time and date after
changing the battery... To return your watch to Timex, visit the retailer where you
purchased your watch or go to
for information on contacting Timex...
** Shipping & handling charges apply.
NEVER INCLUDE A SPECIAL WATCHBAND OR ANY OTHER ARTICLE
OF PERSONAL VALUE IN YOUR SHIPMENT.
2
ENGLISH 990-095926-05
MIDDLE
WED 14
SET TIME
DAY, DATE
http://www...timex...com/productWarranty...html
OUT