Haier HRK-176AA Instrucciones Para El Usuario página 10

8. Remove the hinge pin (9) that is in the bottom of door. At the other side of door, insert the
replacement hinge pin that is supplied with the appliance.
9. Set the door to its place and make sure the door seat at the lower hinge (6).
10. Fix the upper hinge (4) with the two screws (3) and the top with four screws (1) (2).
9
figure 1
Figure 1: Represents position of components prior to door reversal
Figure 2: Represents position of components after door reversal
If you also want to change the opening direction of freezer door inside, please follow the
instruction below:
1. Remove the one screw (1) and take away the lock button (2).
2. Remove the two screws (3) that hold the down axis cover (4) and take away the cover (4).
3. Remove the door and place it on a padded surface to prevent scratching it.
4. Remove the up axis cover (5) and transfer it to opposite position.
5. Turn the door for 180° and set it to the up axis cover.
6. Fix the down axis cover (4) with the two crews (4).
7. Fix the lock button (2) with the one screw (1)
2
1
4
3
8
7
6
5
2
4
3
7
6
5
-8-
1
8
9
figure 2