Publicidad
Idiomas disponibles
Idiomas disponibles
EN
ENGLISH
The Hella transistorized ceiling
lamp works noiselessly and is
maintenence-free. It ist
transistorized for trouble-free
operation and low current
consumption.
Advantage: The lamp can be
used when the vehicle is
12
stationary without putting
excessive strain on the battery.
1.0 Mounting
1.1 The mounting place must be
level, with no projections.
1.2 Prise the lens away from the
base plate by applying a
screwdriver to the switch end or
long end of it. Remove the lens.
1.3 Drill holes for fixing screws
and cable entry in accordance
with the hole pattern (shown in
the illustration). Two 4,2 mm
diameter holes in the base plate
of the lamp permit the use of max.
3,5 mm selftapping, wood or
metric-thread screws.
2.0 Wiring up
2.1 Connect the positive lead
(black) and the negative lead
(brown) to the verhicle electrical
system. The connectors (insulated
socket terminal strips or blade
connectors) can be pushed
through the rectangular opening
into the lamp.
2.2 Replace lens (switch knob
must be over switch spring) and
snap it into position on the base
plate.
Publicidad
