Electrical Specifications - Amprobe ACD-45PQ Manual De Uso

E.M.C. :
Overload Protections :
Power Supply :
Power Consumption :
APO Timing :
APO Consumption :
Dimension :
Weight :
Jaw opening & Conductor diameter : 26mm ( 1.0 in) max
Special features :
Accessories :

Electrical Specifications

Accuracy is ± (% reading digits + number of digits) or otherwise specified, at
23 ˚C ±5 ˚C & less than 75% R.H.
Meets all applicable requirements in IEC/EN
61326-1.
In an RF field of 3V/m:
Total Accuracy = Specified Accuracy + 50 digits
Performance above 3V/m is not specified
ACA Clamp-on jaws : AC 600A rms continuous
+ & COM terminals (all functions) : 600VDC/
VAC rms
standard 1.5V AAA Size (NEDA 24A or IEC LR03)
battery X 2
Voltage, ACA, Hz & Power functions: 11mA
typical
Ohm function: 5.5mA typical
Idle for 30 minutes
4µA typical
L189 X W78 X H40 mm (L7.4 X W3.1 X H1.6 in)
224 gm approx 192 gm approx (0.42 lb)
Backlighted display; AutoVATM (Auto Selection
on ACV, DCV or ACA functions); selectable
Power parameters of W, VAR & VA with Total
Power Factor in dual-display; kWHr Recording;
Display Hold; PEAK-rms HOLD
Test leads (pair), batteries installed, user's
manual & soft carrying pouch
17