Safety Instructions For Batteries; Remote Control - Revell Control NANO POCKET XS Manual Del Usuario

Safety instructions for
batteries:
• Rechargeable batteries must
be removed from the remote
control prior to recharging.
• Non-rechargeable batteries
may not be charged.
• Rechargeable batteries may
only be charged under the
supervision of an adult.
• The combination of different
types of batteries as well as
new and used batteries must
be avoided.
• Only recommended batteries
or those of an equivalent type
may be used.
• Batteries must be inserted
according to the correct
polarity (+ and -).
• Depleted batteries must be
removed from the remote control.
• The connection terminals may
not be short-circuited.
• Remove the batteries from the
remote control if they are not
to be used for an extended
period of time.
Charging unit safety
instructions:
• Non-rechargeable batteries
may not be charged.
• This charging unit is not
suitable for people (including
children) with physical or
mental limitations, or those
with insufficient knowledge
and experience of charging
units, unless under supervision
or following proper directions
from a parent or legal
guardian.
20 20 20
• Children must be supervised –
the charging unit is not a toy!
• The charging unit for the LiPo
battery is specially designed
for the charging of the model
battery. The charging unit may
only be used to charge the
model battery, not other
batteries.
The model is equipped
with a rechargeable lithium
polymer battery. Please
observe the following safety
instructions:
• Never throw LiPo batteries into
a fire or store them in a hot
location.
• Only use the supplied charger
to charge the battery. The use
of a different charger may lead
to the permanent damage of
the battery and neighbouring
parts, as well as physical
injury!
• Never use a charger for NiCd/
NiMH batteries!
• Always ensure that the
charging process takes place
on a fireproof surface in a
fire-resistant environment.
• Do not leave the battery
unsupervised during the
charging process.
• Never disassemble or alter the
battery contacts. Do not
damage or puncture the
battery cells. There is a risk of
explosion!
• The LiPo battery must be kept
out of reach of children.
• When disposing of batteries,
they must be discharged or
their capacity must be fully
depleted. Cover exposed
terminals with adhesive tape in
order to prevent short-circuiting!
Maintenance and care:
• Please only use a clean, damp
cloth to wipe off the model.
• Protect the model and
batteries from direct sunlight
and/or direct heat.
• Never allow the remote control
and charging unit to come into
contact with water, because
the electronics will be
damaged as a result.
Technical changes and
differences in colour reserved!
1 MODEL
1A Rotors
1B Charge socket

2 REMOTE CONTROL

2A Controller for thrust and rotation
2B Control for forwards/backwards
and banking
2C Trim for forwards/backwards
2D Banking trim
2E Joystick
2F Charger plug
2G Charge indicator
Required batteries for the
model:
Power supply:
Rated output: 1 x DC 3,7 V / 2 Wh
Batteries: 3,7 V rechargeable
LiPo battery (included)
Capacity: 100 mAh
Battery requirement for the
remote control:
Power supply:
DC 6 V Batteries:
4 x 1.5 V "AA"
(not included)
1C ON/OFF switch
1D Status LED
2H Battery compartment
2I Battery holder
2J Battery cover
2K Flip button - press longer for
return to home
2L ON/OFF switch
2M Turbo button – press longer for
headless mode
21 21 21