Rola ADJK Guía De Instrucciones página 57

These instructions contain IMPORTANT safety information. Please read and keep for future reference.
NOTE: This Fit Kit instruction sheet is a supplement to the End Support instructions.
Users must read and understand all warnings and precautions before using the ROLA cross bar systems.
Installation is the end user's responsibility and beyond Horizon Global's control. Therefore, Horizon Global exclusively limits its Warranty to
the repair or replacement of a defective product. Damage to your vehicle, your cargo or any person or property is excluded.
•
Maximum roof loads = weight of the cross bars + accessories + the weight of the load carried. Maximum load is defined by ROLA or
the Manufacturer- use which ever is lower.
Weight of Cargo:
XX lbs. (XX kg)
Do not exceed vehicle carrying limits see owners manual or ROLA's limits- whichever is lower. This is the weight of your carried
cargo plus the weight of the cross bars.
•
Use only the ROLA recommend Rail kits and Fit Kits for your specific make, model and model year.
•
To avoid vehicle paint damage, always insure the vehicle doors are open and straps fully extended down when installing
the cross bars.
•
Make sure all bolts, straps, locks are tightened and locked before every trip. Check all for signs of wear and replace as
needed. Check loads periodically during trips.
•
Remove your cross bars when not is use and before entering automatic car washes.
•
Lower your driving speeds to less than posted speeds depending on road conditions, wind speeds and loads being carried.
WARNING
WARNING
Weight of Cross Bars:
XX.X lbs. (XX.X kg)
+
See your purchased kit
MAX 80 km/h
PAGE 2
MAX. LOAD LIMIT:
=
XX lbs. (XX kg)
See your purchased kit
Rev A • Questions? (800) 234-6992 • ROLAProducts.com