Introduction; Proper Use; Features And Equipment; Included Items - Parkside PBS 900 A1 Instrucciones De Utilización Y De Seguridad

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Introduction

The following pictograms are used in these operating instructions / on the device:
Read instruction manual!
Observe caution and safety notes!
Caution – electric shock!
Danger to life!
Explosive material!
n
Rated idle running speed
0
V ~
Voltage
Belt sander PBS 900 A1
©
Introduction
Please make sure you familiarise your-
self fully with the way the device works
before you use it for the first time and
that you understand how to handle electrical power
tools correctly. To help you do this please read the
accompanying operating instructions. Keep these
instructions in a safe place. If you pass the device on
to anyone else, please ensure that you also pass on
all the documentation.
©

Proper use

The belt sander is designed for dry sanding of large
surfaces of wood, plastic, metal, plaster and painted
surfaces. The device may only be used for dry sand-
ing. Always use a sanding belt and grade of grit
suitable for the particular surface you are sanding.
The speed selected should also be appropriate for
the material. The device is not intended for commer-
cial use. Any other use or modification to the device
shall be considered as improper use and could give
rise to considerable dangers. The manufacturer will
not accept liability for loss or damage arising from
improper use.
36 GB/MT
W
Watts (Effective power)
Safety class II
Wear hearing protection, dust
protection mask, protective glasses
and protective gloves.
Keep children away from electrical
power tools!
Risk of loss of life by electric shock from
damaged mains lead or mains plug!
Dispose packaging and appliance in
an environmentally-friendly way!
©

Features and equipment

Belt speed adjuster wheel
1
Locking knob
2
ON / OFF switch
3
4
Toothed belt cover
5
Dust extraction spout
6
Belt adjuster screw
Auxiliary handle
7
Ventilation slots
8
Tensioning lever
9
Dust collection box
10
Extraction adapter
11
Fixed mounting kit:
Mounting frame
12
13
Clamp plates 2 x
14
Screw clamps 2 x
15
Spacer plates 2 x
Screw
16
©

Included items

Check that all the items and accessories
are present immediately after unpacking
the device:
1 Belt sander PBS 900 A1
1 Sanding belt

Publicidad

Tabla de contenido
loading

Tabla de contenido