Switching Off The Appliance - Dovre Sense 203GAO Serie Instrucciones De Instalacion Y Uso

appears on the display, 1 starts blinking. When the
switch has been made, 2 starts blinking
Two-button operation
Press the [on/off] button and
until you hear two short beeps and you see a blinking
series of lines
This confirms that the initiation sequence has started;
release the button.
The mains gas starts flowing as soon as the
l
pilot flame has been ignited.
The handset automatically switches to Manual
l
mode after the main burner has been ignited.
You can switch from two-button ignition to one-button
ignition by holding down the [on/off] button for longer
than 10 seconds after inserting the batteries. ON
appears on the display, 2 starts blinking. When the
switch has been made, 1 starts blinking
16
09-20021-375
(two-button ignition)

Switching off the appliance

Press the [on/off] button to switch off the appliance.
There is a 5-second delay before the next ignition is
possible.
Subject to change because of technical improvements
09-20021-376