Language; Common; Time/Date; Sys Info - koban KMIR-01 Manual De Instrucciones

KMIR-01

6.6. Language

• Press RIGHT/MENU button to to enter language menu.
Three options are available: Simplified Chinese, Traditional
Chinese and English.
Use UP/DOWN button to select language and use RIGHT/
MENU button to set selected language to be valid.

6.7. Common

Press RIGHT/MENU button to enter common menu.
Five options are available: Key sound, Brightness and Auto
Off.
• Key sound: Use RIGHT/MENU button to set beep on or
off.
• Brightness: Press RIGHT/MENU button to set focus
on this option. In focus state, use UP/DOWN button to
change LCD's brightness, use LEFT/RIGHT/MENU button
to exit focus state. The available brightness's range is
100% to 10% in 10% steps.
• Auto Off: Press RIGHT/MENU button to set focus this
option. In focus state, use UP/DOWN button to choose the time period after which the
meter enters the sleep mode.
28
EN EN
6.8. Time Date
Press RIGHT MENU button to enter time menu.
In this menu, yeas, month, day, hour, minute and time
formate can be set. The changes take effect after exitting
settings menus.

6.9 Sys Info

Press RIGHT MENU button to enter system infomation
menu.This menu contains software's version, hardware's
version and thermal imager's version.
Key sound

6.10 Factory Set

When select Factory Set option, after press RIGHT/MENU
button, thedialog box will be displayed as show below.
Select 'YES' button, system parameter will be reset.
KMIR-01
29