Technical Data - ANSMANN 1700-0114 Manual Del Usuario

Quick-Charge-capable or supports Power Delivery (PD). Please refer to
this information from the product information or operating instructions
of the respective manufacturer or the Internet.
Simultaneous charging of multiple end-devices is possible with restric-
tions. This depends on the total charge current required.
The POWERBANK switches off automatically after the charging is
complete. Please disconnect your device from the POWERBANK once the
charging process is complete. Please note that the Powerbank should
not be charged and discharged simultaneously.
The POWERBANK has a smart microcontroller that detects the connec-
ted device, provides the optimum current, and thus reduces the
charging time to a minimum.
The POWERBANK may heat up a little depending on the charge/dischar-
ge current.

TECHNICAL DATA

1. Cell type:
2. Capacity:
3. Input:
4. Output:
5. Accessories:
6. Operating temperature: -20°C to +25°C
7. Charge time:
8. Protective functions:
9. Display:
Deutsch |
Italiano | Nederlands | Dansk | Suomalainen | Norsk | Svenska
Li-Po battery pack
15000mAh / 55,5Wh
Micro-USB:
USB Type C (PD): 5VDC - 9VDC | 2.5A
USB Type C (PD): 5VDC | 3
USB (QC3.0):
Total output:
2x charging cables (USB to Micro-USB and
USB Type C to USB Type C)
5V | 2 A:
.0
9V | 2.5A:
Over-charging protection, deep discharge
protection, overload protection
short-circuit protection
LED display
English | Français | Español | Português
5VDC | 2 A
.0
A
.0
9VDC | 2 A
.0
12VDC | 1.5A
5VDC | 3 A
.0
9VDC | 2 A
.0
12VDC | 1.5A
3 A max. | 18W
.0
about 8h
about 5h