Technical Data - ANSMANN 1700-0098 Manual De Instrucciones

WIRELESS
Wireless charge output is activated by pressing the power button. This
is indicated via the red power LED. Place your Qi-capable device on the
Powerbank. The charge LED illuminates in green as soon as the device
is charged. The red power LED extinguishes during the energy transfer.
While the Powerbank is being wirelessly charged, all outputs are
automatically deactivated until all charge connections for charging
the Powerbank have been removed.
When charging the Powerbank via USB / type C, simultaneous charging
of your end-device is possible with restrictions. Please note that the
power of the outputs will be reduced here.
Simultaneous charging of multiple end-devices is possible with res-
trictions. This depends on the total charge current required.
Please disconnect your device from the POWERBANK once the charge
process is complete. The POWERBANK switches off automatically if it is
not charging a device.
The POWERBANK may heat up a little depending on the charge/
discharge current.

TECHNICAL DATA

1. Cell type:
2. Capacity:
3. Input:
Type C:
Wireless:
4. Output:
5. Accessories:
6. Operating temperature: 0°C to +25°C
7. Charge time:
8. Protective functions:
9. Display:
Deutsch |
Li-Po rechargeable battery pack
8000mAh | 29.6Wh
Micro-USB: 5V | 2100mA
5V | 3000mA
5V | 900mA
USB:
Type C:
Wireless:
Charge cable (USB to Micro-USB)
Micro-USB: ca. 4h
Type C:
Wireless:
Over-charging protection, deep discharge
protection, overload protection
LED display
English | Français | Español | Português
Italiano | Nederlands
5V | max. 2100mA
5V | max. 2100mA
5V | max. 1000mA
ca. 3h
ca. 8h