Icaro And Icaro Tech - Volume Distribution; Icaro And Icaro Tech - Elasticized Bands; Icaro And Icaro Tech - Pockets And Accessories; Quick-Release Weight Pockets Code 784 - Seac Sub ICARO Manual De Usuario

ENGLISH
Drawing 5
Pulling the tube to activate the overpres-
sure valve
Drawing 6
Pulling the elastic to regulate the expan-
sion of the bag

Icaro and Icaro Tech - Volume distribution

The distribution of air volumes is a rear type
but with perfect balance in any phase of
diving, from the surface to the end of the dive
itself. The rear volume permits an absolute
freedom of movement together with the pos-
sibility of making good headway in water
while minimizing drag.
34

Icaro and Icaro Tech - Elasticized bands

Icaro Tech and Icaro stabilizing jackets are
fitted with elasticized bands to facilitate
making headway in water as well as the out-
let of air.
In fact, the elasticized bands act directly on
the bag by maintaining a hydrodynamic form
during the dive and facilitating the outlet of
air from the Power inflator or valves when
required. In the Icaro Tech model it is also
possible to regulate the tension of the elastic
that runs along the perimeter of the bag (see
illustration number 6). A higher tension of
the elastic will correspond to an improved
movement in the water and an easier and
quicker outlet of air in any position, which
will naturally result in a loss of buoyancy that
will in any case be limited to a few kilograms
(about 2/2.5). Furthermore, it is also possi-
ble to separately regulate the elastic of each
bag for those who may need to balance their
position in the water due to heavy lateral
weights.
Icaro and Icaro Tech - Pockets and
accessories
There are optional accessory pockets that
make the new ICARO and ICARO TECH stabi-
lizing jackets even more convenient and
practical.

Quick-release weight pockets code 784

Weight pockets to be attached to the right or
left waist belt (the correct balance can be
obtained by inserting a pair of weight poc-
kets), a connection system with a belt with
clips guarantees that quick-release weight
pocket will load the weight directly onto the
upper shoulder straps instead of onto the
diver's back.
The weight pocket is made in two parts. The
first is an external casing in Cordura 1000
which is accessible from above by means of