General Precautions; Warranty Conditions; Identification Plate - Enofrigo DOGE ISOLA Manual De Instrucciones

This manual should be considered an integral part of the machine and must be kept for future consultation until
the machine is scrapped.
This manual reflects the state of the art existing at the time of sale of the machine and cannot be considered
inadequate due to subsequent updates on the basis of new experience.
The manufacturer reserves the right to make any updates necessary to the machine and the instruction manual
without this entailing the obligation to update machines and/or manuals pertaining to previous production. The
manufacturer will nevertheless provide the customer with any further information requested and likewise will
take due account of any proposals for improvement of this manual.
If the machine is sold, the customer is kindly requested to inform the manufacturer of the address of the new
owner.
The manufacturer declines all liability for injuries sustained by persons or animals or damage to things deriving
from:
a. inappropriate use of the machine or use of it by personnel not trained in the use of professional machines
b. use contrary to the specific national legislation
c. incorrect installation
d. electrical power supply faults
e. inadequate cleaning and maintenance
f. non-authorised modifications or work
g. use of non-original spare parts or parts not specific for the model
h. total or partial failure to observe the instructions contained in this manual
i. exceptional events

3. GENERAL PRECAUTIONS

• Do not leave the machine unattended, especially if there are children in the vicinity.
• The liquid in the machine tray is not toxic, but do not drink it.
• Place only warm food in the machine.
• The conservation of food with a high water content can cause the formation of condensation: this does not
affect correct operation of the machine.
• Before carrying out any installation, cleaning, maintenance or repair operation, turn off the main switch
and unplug the unit from the electrical power socket interlocked by means of a switch.

4. WARRANTY CONDITIONS

The machine warranty conditions are listed below:
• the duration of the warranty is one year (i.e. 12 consecutive months from the date of purchase);
• the warranty excludes the electrical and electronic parts and components of the machine which, by their very
nature or as a result of their application, are subject to deterioration or wear;
• the warranty lapses if the machine has been used without observing the directions contained in this manual;
• the warranty lapses if the customer disassembles, modifies or attempts to repair the machine on its own or by
means of third parties not authorised by the manufacturer or the authorised dealer;
• all disputes will be referred exclusively to the Court of Padua.

5.IDENTIFICATION PLATE

The identification plate, containing all the data necessary for identification of the machine, is affixed as shown
by the arrow.
The following data are provided:
• manufacturer identification;
• machine model;
• serial number;
• year of manufacture;
• CE conformity mark;
CT68900002 Rev.0 09-13
20