Vaillant auroTHERM VFK 125 Manual De Instrucciones página 61

Ocultar thumbs Ver también para auroTHERM VFK 125:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Fig. 6.9 Balancing the mounting rails
1
Fig. 6.10 Hooking the collector
3
Fig. 6.11 Central mounting rail (field arrangement on top of each other)
Installation manual auroTHERM 0020057143_04
• Make sure that the mounting rails are fixed
in horizontal position.
• Compensate any difference in height by
moving the clamping elements.
• Pull the clamping element upward, now it
can be moved and it engages again when
released.
1
2
• Place the collector with the lower edge on
the mounting rail and hook it to the clam-
ping elements.
• Make sure that the upper part (1) of the
clamping element is above the collector
edge.
• Tighten the clamping elements of the
lower mounting rail with the socket/combi-
nation wrench (SW 13).
a
u
2
• Slide the central mounting rail until it flus-
hes with the lower collector (1).
• Make sure that the hook of the clamping
1
element is above the collector edge.
• Fix the mounting rail (2) for the upper coll-
ector to the clamping element.
• Place the upper collector (3) in the central
mounting rail.
• Screw the clamping elements of the cen-
tral rail.
On-roof mounting 6
Caution!
Danger of damage to the collector as
a result of incorrect assembly!
After tightening the clamping ele-
ments, make sure the tension is cor-
rect by shaking the upper part of the
clamping element. If it can be moved,
retighten the nut.
With fields arranged on top of each
other
GB
23

Publicidad

Tabla de contenido
loading

Tabla de contenido