Setting Up The Device - THOMSON SB240W Manual De Instrucciones

SETTING UP THE DEVICE

WIRELESS SOUND BAR
SB240W
A. PRoDuCT oN / oFF SWITCH
• Before turning your device on, make sure that the sound bar and the subwoofer are
connected.
• Connect each of the power supply cables to a mains socket.
• Press the PoWER (11) button on the rear panel of sound bar and that of the
subwoofer (17) to turn them on: The standby indicator turns on.
• Press the q key to turn them on.
• Press on INPuT to select Tv or AuX/PC as the source.
• Turn on the desired audio source.
N.B.:
• The subwoofer is connected to the sound bar by a wireless system.
• AuX mode (indicator light blue).
• PC mode (indicator light red).
B. voLumE SELECTIoN.
• Press the voL + (9) and voL- (8) buttons on the main view panel of the unit or the
voL + (11) and voL- (4) buttons of the remote control to adjust the volume.
C. muTE SELECTIoN
• Press the muTE (8) key on the remote control once to turn the sound off and once
again to reactivate it.
D. RESET
• Press the RESET (9) key on the remote control to reset all the speakers to factory
settings.
USAGE
11 EN