Service Information; Full Two-Year Home Use Warranty - Black and Decker PF260 Manual De Usuario

• Where possible, clamp the workpiece to a work bench or similar sturdy surface.
• When sanding new layers of paint before applying another layer, use extra fine grit.
• On very uneven surfaces, or when removing layers of paint, start with a coarse grit. On
other surfaces, start with a medium grit. In both cases, gradually change to a fine grit
for a smooth finish.
• Use the correct grit sanding belt for your application. The following is a suggested list of
belt grits to use with different materials.
Tool Care And maintenance
Never apply excessive force when you use your sander. Too much force can result in an
overload and cause damage to the motor or the workpiece. Always keep the air cooling
vents clear. To clean your belt sander, proceed as follows:
wARNiNg:
To prevent accidental operation, turn off and unplug sander
before performing the following operations. Failure to do this could result in serious
personal injury.
• Use a clean dry paint brush to clear vents and ducts.
• Clean the housings using a clean damp cloth (do not use solvents, gas or turpentine.)
imPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustment should be performed by authorized service centers or other qualified service
personnel, always using identical replacement parts.
ACCESSORiES
Use only 1/2in. x 18in. (13mm x 457mm) sanding belts. Recommended accessories for
use with your tool are available at extra cost from your local dealer or authorized service
center. If you need assistance in locating any accessory for your tool, please call
1-800-544-6986.
CAuTiON:
: The use of any other accessory not recommended for use with this
tool could be hazardous.

SERViCE iNfORmATiON

Black & Decker offers a full network of company-owned and authorized service locations
throughout North America. All Black & Decker Service Centers are staffed with trained
personnel to provide customers with efficient and reliable power tool service.
Whether you need technical advice, repair, or genuine factory replacement parts,
contact the Black & Decker location nearest you. To find your local service location, refer
to the yellow pages directory under "Tools—Electric" or call: 1-800-544-6986.

fuLL TwO-yEAR hOmE uSE wARRANTy

Black & Decker (U.S.) Inc. warrants this product for two years against any defects in
material or workmanship. The defective product will be replaced or repaired at no charge
in either of two ways.
The first, which will result in exchanges only, is to return the product to the retailer from
whom it was purchased (provided that the store is a participating retailer). Returns should
be made within the time period of the retailer's policy for exchanges (usually 30 to 90
days after the sale). Proof of purchase may be required. Please check with the retailer for
their specific return policy regarding returns that are beyond the time set for exchanges.
The second option is to take or send the product (prepaid) to a Black & Decker owned
or authorized Service Center for repair or replacement at our option. Proof of purchase
may be required. Black & Decker owned and authorized Service Centers are listed
under "Tools-Electric" in the yellow pages of the phone directory.
This warranty does not apply to accessories. This warranty gives you specific legal
mATERiAL
Solid Wood
Veneer
Chipboard
Plastics
Steel
Paint Removal
Balsa Wood
Acrylic
BELT gRiT
80
150
60/80
100
80 (remove dust bag)
40/60
100
100
9