Features - koban KP 2203 Manual Del Usuario

Features

1. For power measurement of
3-phase 3-wire circuit, 3-phase
4-wire circuit, single-phase
circuit.
2. The instrument can complete the
true RMS value measurement. If
there is nonsinusoidal AC current
input signal, it can accurately
measure the active current.
3. Using autorange switch circuit
and modulus transducer which
has 8000 count and high
resolution, the instrument
has high accuracy and easy
operation.
4. Minimum current of Active
Energy measurement is 0.5A, it
can measure expending energy
per hour of general electrical
equipment.Measurement and
display five parameters of power:
Active Power, Apparent Power,
Power Factor, Reactive Power,
Active Energy.
5. Double display two parameters
on each menu and store
28 groups of measurement
parameter.
6. Measure five power parameters
of each phase and total
power value in three-phase
www.grupotemper.com
Phase digital power clamp meter
measurement mode respectively.
7. Multifunctional button control,
there are double scales analogue
bar graph to display fluctuation
of voltage and current.
8. With PC RS232C interface and
special WINDOWS data graphics
software.
9. Display measurement time and
select tested voltage signal be
power supply for the clamp
at one time in Active Energy
measurement mode, so the
instrument can measure for long.
10. The instrument is a portable
clamp meter. It is very light and
convenient to carrying.
Instructions manual |
KP 2203
35