koban KP 2203 Manual Del Usuario página 39

meter and a computer, the
communication function is
working.
CLEAR
8. Clear Memory
Button.
Press button for three
CLEAR
seconds to erase all measured
data in the meter memory in the
measurement mode.
9. Backlight Button.
Press button to turn
the backlight on or off. When
the backlight turned on over
five seconds, it will turn off
automatically.
MAX
10. Maximum Value
Measurement Button / Previous
Record Button.
Press button to
MAX
measure maximum value in
measurementmode. The display
shows current maximum value in
the secondary display.
When you turn the selector to
MR, press
MAX
recall previous memory location
and display the data on the LCD.
Once pressing this button, the
clamp meter recalls a memory
location previous current
location.
MIN
11. Minimum Value
Measurement Button / Next
Record Button.
www.grupotemper.com
Phase digital power clamp meter
12.
button to
KP 2203
Press button to measure
MIN
minimum value in measurement
mode, the display shows current
minimum value in the secondary
display.
When you turn the selector to
MR, press button to
MIN
recall next memory location and
display the data on the LCD.
Once pressing this button, the
clamp meter recalls a memory
location next current location.
SAVE
Data Save Button.
Press button to save
SAVE
current measured data to the
meter in measured mode. The
meter can save 28 groups of
measured data into the meter at
most.
Instructions manual | 39