Omcan PE-IT-0024-S Manual De Instrucciones página 12

Operation
MECHANICAL OVEN START UP AND USE
COMMAND PANEL DESCRIPTION
Top heating elements
function pilot light
Bottom heating elements
function pilot light
Main switch
FIRST LIGHTING OF THE OVEN
At the first use of the appliance it is advisable to heat the empty oven to eliminate bad smells caused by the
refractory stones evaporation and the inner metallic parts.
Procedure:
• Fully open the exhauster valve.
• Set the main switch in the position "1" after checking that the oven is connected with the power supply.
• Leave the oven working (empty) for at least 8 hours at the temperature of 300° before proceeding to the
first baking.
START UP PHASE
After connecting the oven to the electric net rotate the main switch in position "1". The digital thermometer
display shows the actual average temperature of the baking chamber. Rotate the thermostat knobs and until
the expected temperature. In this way top and bottom heating elements are under working and the relevant
light signals switch on.
GENERAL INDICATIONS FOR A GOOD COOKING
Generally for the food products it is not advisable to give precise temperature and baking time, because of their
different characteristics. Particularly, regarding pizza and similar products, time and temperatures depend on
12
Thermostat for the regulation
of top temperatures
Digital control thermometer
Thermostat for the regulation
of bottom temperatures
Cooking chamber light switch