OPERATING THE RADIO
A. Auto scan
1. Press the Power button
2. Set the Function button (6) to the TUNER position.
3. Press the PLAY/PAUSE button (9) for 2 seconds to start the AUTO SCAN function and automatically
search for radio stations for 3 minutes. The screen displays the digits and station numbers. Once
complete, the unit will store a maximum of 20 preset stations.
4. Press the FOLDER UP button (11) to select the desired station.
B. Tuning
1. Set the Function button (6) to the TUNER position.
2. Turn the Tuning control knob (14) to automatically tune in to the next station.
3. Adjust the Volume (4) to the desired level.
4. Press the Power Button
C. Storing stations in memory positions P01 to P20
1. Set the Function button (6) to the TUNER position.
2. Tune in to the desired station.
3. Press the MODE/CLOCK SET button (13). The current position number will flash in the display,
e.g. 'P01, P02... P20'.
4. Press the FOLDER UP button (11) to select the station number.
5. Press the MODE/CLOCK SET button (13) again to save. 20 radio stations can be stored in memory.
6. Press the FOLDER UP button (11) to select and listen to a saved station.
Antenna
Extend the wire to obtain the best reception. You may need to turn or change the position of the unit
to improve reception.
SETTING THE CLOCK
1. Press the Power button
2. Press the MODE/CLOCK SET button (13) and hold for 2 seconds: the display will flash. Press
SKIP DOWN/BACK
3. Press the MODE/CLOCK SET button again: the hour will blink. Press SKIP DOWN/BACK
SKIP UP/NEXT
4. Press the MODE/CLOCK SET button again: the minutes will blink. Press SKIP DOWN/BACK
or SKIP UP/NEXT
the time.
OPERATING THE CD/ USB PLAYER
1. Press the Power button
2. Set the Function button (6) to the CD or USB position.
3. Insert a compact disc or USB flash drive; "CD" or "USB" will be displayed.
PLAY/PAUSE button (9)
• When music is stopped, press the button to play the music.
• When music is playing, press the button to pause.
• When music is paused, press the button to resume play.
(5) to turn the unit on.
(5) to turn the radio off.
(5) to turn the unit on.
(7) or SKIP UP/NEXT
to set the hour.
to set the minutes. Press the MODE/CLOCK SET button to finish setting
(5) to turn on the unit.
(8) to select the time format (12 hrs or 24 hrs).
- EN 5 -
or