THOMSON RCD300U Manual De Utilización página 16

STOP button (10)
• When music is playing or paused, press the button to stop.
• When in programming tracks, press the button to exit the mode.
SKIP UP/NEXT button (8)
• When music is stopped, press the button to select the track you want to play (and go to the first track
if currently on the last track).
• When music is playing, press the button to skip to the next track (and go to the first track if currently
playing the last track).
• Press the button and hold for 2 seconds to fast-forward.
• When playing programmed tracks, press the button to skip to the next programmed track (and go to
the first track if currently playing the last track).
SKIP DOWN/BACK button (7)
• When music is stopped, press the button to select the track you want to play (and go to the last track
if currently on the first track).
• When music is playing, press the button to skip to the previous track (and go to the last track if
currently playing the first track).
• Press the button and hold for 2 seconds to rewind.
• When playing programmed tracks, press the button to skip to the previous programmed track (and
go to the last track if currently playing the first track).
CD PLAY REPEAT
• You can choose between two modes: Repeat 1 and Repeat All.
• During Repeat 1 mode, the player repeats the current CD track.
• During Repeat All mode, the player repeats all tracks on the CD; when it reaches end of the last
track, it will return to the first track.
PROGRAMMING CD & USB PLAY
You can only enter programs in STOP mode. Press the
instructions below.
1. Press the MODE/CLOCK SET button (13); "Memory" is displayed and the track number flashes.
2. Press the SKIP DOWN/BACK
you wish to program.
3. Press the MODE/CLOCK SET button again to confirm. The unit saves the track number and goes
to the next track you wish to program.
4. The unit can store 20 CD programs and 99 USB programs. After it has stored the maximum
number of programs, no further entry is possible.
5. If you press the
content and returns to STOP mode.
6. If you press the
displayed and the unit starts playing the programmed tracks.
7. If you press the SKIP DOWN/BACK
tracks, the unit skips to the previous or next programmed track.
8. If you press the
programmed track selection is kept. Press the
content and return to STOP mode.
Remark: Please note that the unit can only read FAT32 format USB drives with less than 32GB.
BLUETOOTH (optional)
Bluetooth pairing
1. Press the Function button
2. Select RCD305UBT in your device list (phone, tablet, computer...)
3. If you want to pair a new device: Press BT PAIR to restart the pairing process
/ SKIP UP/NEXT
STOP button (10) while programming the unit, the unit clears the programmed
PLAY/PAUSE button (9) when the unit has been programmed, "Memory" is
STOP button when playing programmed tracks, the unit stops playing but
several times until you reach "BT"
STOP button (10) and then follow the
buttons (7, 8) to choose the track number
/ SKIP UP/NEXT
STOP button again to clear the programmed
- EN 6 -
buttons when playing programmed