Check Of The Programmed Data; To Delete A Time Setting In Program P3 - Bticino LIGHT TECH L4448 Instrucciones De Empleo

Check of the programmed data

DAY 1
Select the program to be checked pressing
1
S.
P3 16
For the program MAN: press the keys + or
P + - M S
-.
The display shows the programmed tem-
perature.
For the other programs press P and then
several times S; the display repeats the
sequence of the stored data.
It is possible to change the flashing
numbers appearing on the display
according to the procedure used for
programming.
118
To delete a time setting in
ON 1 22
DAY 1
Tmax
program P3
1
Select the time setting to be deleted
P3 PRG
pressing P and then several times S.
P + - M S
To delete press keys + and - simultaneously.
119