Setting Up Your Hand Mixer; Attaching The Accessories; Removing The Accessories - KitchenAid KHM51 Manual Del Usuario

Setting Up Your Hand Mixer

Attaching the Accessories

Be sure to read and follow the specific
instructions in this manual for proper use
of this Hand Mixer.
1. Make sure the Speed Control is in the
"OFF" position.
2. Unplug the Hand Mixer from the electrical
outlet.
3. Each pair of accessories (Turbo Beater™
accessories, optional Dough Hooks ) will
have one accessory with a collar (D),
and one without (C). The Hand Mixer
has a specific opening for each. Single
accessories, like the optional Whisk
or Liquid Blender Rod, will always have
a collar (D).
C
4. Insert the accessory with a collar (D) into
the larger opening (B) of the Hand Mixer.
Line up the flanges on the accessory with
the slots in the opening and push in until
it locks into place.
5. Insert the accessory without a collar (C)
into the smaller opening (A) of the
Hand Mixer. Line up the flanges on the
accessory with the slots in the opening
and push in until it locks into place.
A
D

Removing the Accessories

1. Make sure the Speed Control is in the
"OFF" position.
2. Unplug the Hand Mixer from the electrical
outlet.
3. Press the Ejector Button to release
the accessories from the Hand Mixer,
then remove them.
B
D
B
9