Ac Voltage/Dc Voltage Measurement; Resistance Measurement; Continuity Measurement - koban KMD 03 Manual Del Usuario

KMD 03
Digital multimeter
2. When inputting voltage on the meter input terminal, due to the existence
of the induced voltage, voltage induction indicator also may light.
3. Interference sources in the external environment (such as flashlight,
motor, etc.) may trigger erroneous non-contact voltage detection.

AC Voltage/DC Voltage Measurement

Voltage is the potential difference between two points. AC voltage polarity
changes over time, while DC voltage polarity does not change over time.
DC voltage measuring range of this meter: 400.0mV, 4.000V, 40.00V, 400.0V,
600V; AC voltage measuring range of this meter: 400.0mV, 4.000V, 40.00V,
400.0V, 600V. The 400mV measuring range can be entered only in the manual
measuring range mode.
To measure AC and DC voltage:
• Rotate switch to voltage position.
• Respectively connect black and red test probes to COM input socket and V
input socket.
• Measure the voltage of circuit to be tested with other two ends of test
probes. (Connected with the circuit to be tested in parallel)
• Read the measuring voltage value from LCD display. When measuring DC
voltage, the display will simultaneously show the voltage polarity which is
connected with red test probe.
• Press FUNC key to switch AC voltage, DC voltage measurement.

Resistance measurement

Resistance range of this meter: 400.0Ω, 4.000kΩ, 40.00kΩ, 400kΩ, 4.000MΩ,
10.00MΩ .
To measure resistance:
• Rotate rotary switch to
• Respectively connect black and red test probes to COM input socket and V
input socket.
• Measure the resistance value of circuit to be tested with other two ends of
test probes.
• Read the measuring resistance value from LCD display.

Continuity measurement

When measuring resistance, press FUNC key to switch continuity test.
• Respectively connect black and red test probes to COM input socket and Ω
input socket.
• Measure the resistance value of circuit to be tested with other two ends of
Instructions manual | 30
position.
www.grupotemper.com