F - Remote Operation (Network) - THOMSON 512314 Manual Del Usuario

19'' IP colour VIdeo surVeIllance kIt
You can access all your video surveillance kit's
channels remotely over the internet using any of the
following methods:
• a computer connected to the internet (no
additional software required, just a web
browser such as Chrome, Safari, Firefox or
Internet Explorer)
• an Android smartphone or tablet connected to
the Internet
• an iPhone, iPod or iPad
1 - START-UP
Your video surveillance kit needs to be connected
to the internet via network cable (through a modem/
router, router or modem).
Go to your video surveillance kit menu using the
mouse, then from the "menu principal" [main menu],
go to the CONfIGURATION [SETUP] / RESEAU
[ NETWORk] menu. Click on the P2P tab:
3 4 5 6
1 Enable: Should be set to OPEN
2 Account Reuse: Tick to allow multiple
remote users to connect simultaneously.
3 Device ID: Your device identifier
4 Etat [Status]: should read 'ONLINE',
denoting that your video surveillance kit
is ready to accept connections from your
smartphone or computer.
5 Local Port: can be changed if problems
are encountered or for a specific network
setup.
6 Password: A login password of your
choosing.

F - rEmOTE OpErATiON (NETwOrk)

2 - REMOTE vIEWING USING A COMPUTER
To view your camera feeds remotely, log on to the
www.vssweb.net website.
Depending on what equipment and browser you
1 Identifiant [ID]: enter your Device ID here
2 Mot de passe [Password]: type in the
password you entered in your video
surveillance kit settings
3 Bouton de connexion [Log in button]
4 Select 'Device login'
are using, you may be asked to install an additional
1
module:
2
If this is the case, you should accept the request.
Comment: If your browser refuses to connect or
the module needs to be installed, please contact
your network administrator or switch to a Firefox or
Chrome browser.
Once you have logged on with your ID and
password, the home page will be displayed:
1
2
3
4
EN
21