Setting The Backlight; Upper Display; Lower Display - Navman FUEL 3100 Manual De Instalación Y Funcionamiento

2-3 Setting the backlight

The display and keys are backlit for easy
reading in dim light. To change the backlight,
change LAmP in the LAmP
(see section 3-3)

2-4 Upper display

Press one or more times to change what is
displayed (for example, if the display shows
USED then press
to change the display to
FLOW):
REMAINING: Fuel remaining. Update this
•
when you add or remove fuel (see section 5).
USED : The fuel used since last reset.
•
To reset fuel used, press
times until used is displayed, then hold ENT
and together until the reading resets
to zero.
• : Displays supply voltage to the head unit.
FLOW: Fuel flow rate.
•
ECONOMY: Distance travelled per unit of
•
fuel used (requires optional speed input, see
section 3-6)
RPM: Engine RPM (DIESEL 3200 only).
•
PORT RPM: Port engine RPM (displayed on
upper display)
STBD RPM: Starboard engine RPM
(displayed on lower display)
Note:
• If the boat has twin engines, then when
FLOW is displayed, press ENT one or more
times to display PORT, STBD or TOTAL
flow.
• If the boat has a twin fuel tanks, then when
REMAINING or USED is displayed, press
ENT one or more times to display PORT,
STBD or TOTAL data.
8
menu.
one or more
NAVMAN

2-5 Lower display

Press one or more times to change what
is displayed:
LOG: Trip distance; the distance travelled
•
since log was reset.
To reset log, press
until log is displayed, then hold ENT and
together until the reading resets to zero.
TOTAL LOG: Total distance; the distance
•
travelled since total log was reset.
To reset total log, press
times until total log is displayed, then hold
ENT and together until the reading
resets to zero.
hours: Hours the engine has run since
•
hours was reset.
To reset hours, press
until hours is displayed, then hold ENT and
together until the reading resets to zero.
RANGE: Estimated distance that can be
•
travelled on the remaining fuel at the
current consumption.
SPEED: Boat speed.
•
Note:
LOG, TOTAL LOG, RANGE and SPEED
•
require the optional speed input (see
section 3-6).
FUEL 3100 / DIESEL 3200 Installation and Operation Manual
one or more times
one or more
one or more times