Control Panel; Microwave Cooking; Functions And Use - FAR MSE 25R CI Manual Del Usurario

ENGLISH

Control panel

Set the output
Set the defrost menu
Press once to stop cooking
Press twice to clear settings

FUNCTIONS AND USE

CAUTION
The LED blinks 3 times when the appliance is plugged into an electrical outlet.
Next, ": " blinks to indicate to enter the desired menu settings and cooking duration.
1. Auto Reminder
Once the selected cooking setting is complete, End is displayed on the LED screen
and the oven beeps three times to indicate that it is time to remove the food. As long
as you do not press a single time on the
the oven beeps every 3 minutes.
2. Setting the Clock
Use the key to set the current time and the menu time when ": " blinks on the
LED screen after having plugged in the appliance. You can also skip this step if it is
not necessary.
GB-12
Set the clock or current time
Set the express cooking menu
Start
Select the auto cooking menu
Set the cooking time or weight
key or have not opened the door,
For example: Setting 12:30 pm
Steps
1 After having plugged in and switched on the appliance, ": "
blinks.
2 Press once on the key.
3 Turn the
4 Press the key again.
5 Turn the
6 Press once on the key again or wait 5 seconds for
the numbers to stop blinking.

3. Microwave Cooking

Use this function to cook and heat foods. Press the
screen will successively display 100P—80P—60P—40P—20P.
High Power 100% of the microwave output. Suitable for quick,
complete cooking.
Medium-High Power 80% of the microwave output. Suitable for medium
express cooking.
Medium Power 60% of the microwave output. Suitable for steam
cooking.
Medium-Low Power 40% of the microwave output. Suitable for
defrosting foods.
Low Power 20% of the microwave output. Suitable for keeping
food warm.
CAUTION
The maximum duration that may be set is 60 minutes.
a.
Never operate the oven when it is empty.
b.
At maximum microwave oven output, the oven automatically lowers the output
c.
after a certain cooking time in order to extend its service life.
ENGLISH
Display
:
00:00
dial to set the hours. 12:00
12:00
dial to set the minutes. 12:30
key and the LED
GB-13