Mounting The Device - Olymp HairMaster Manual De Instrucciones

GB
2 Putting the Device into Operation

2.3 Mounting the Device

1. Insert the column tube
base and then push it up against the plastic
bearing .
Shooting up of the telescopic tube!
The telescopic tube
pressure.
When the fastening screw
the telescopic tube may shoot up and lead
to injury.
When loosening the fastening screw
keep a sufficiently safe distance from the
telescopic tube.
2. Fasten the column tube to the bottom of the star
base.
– Place the disk
the star base,
– Using the hexagon socket wrench (Allen key)
, insert and fasten the screw
column tube.
3. Insert the pivot of the dryer
tube .
4. To fasten the dryer in the telescopic tube:

– Insert the screw
on the telescopic tube into the pivot and then
fasten the screw.
5. Insert the cable bracket
tube. Insert the two ends of the cable bracket into

the drill holes of the telescopic tube. The cable
bracket is fastened through internal tension; to
insert the cable bracket, push the two ends apart.
®
User Instructions HairMaster
into the hole in the star
is under spring
is loosened,
on the column tube hole of
in the

into the telescopic

through the drill hole

into the telescopic
| 751 250 / 09.2017
,
39