Operation Of The Programs - Olymp HairMaster Manual De Instrucciones

GB
3 Programs and Program Control

3.2 Operation of the Programs

A hair treatment program is configured for the desired
purpose and started afterwards.
In the following, the W
AVING
presented as an example in order to demonstrate the
operation of these programs.
The Turn and Push program control is operated by
means of the Easy Control Wheel
according to the following principle:
• Scrolling - the menus with Turn (i.e. by turning the
Easy Control Wheel to the left
; the color of the light ring changes from blue to
red),
• Highlighting - a property or a value,
• Activating - a selection or a function key with Push
(by pressing the Easy Control Wheel
Display functions:
The following information is displayed during the
operation of the program control:
• in the information bar
program which is currently configured,
• in the selection box: either the available functions
or the available values
• in the task bar : the function keys of the next
navigation steps possible.
The programs are configured as follows:
The configuration always starts in the main menu A
which shows the programs currently available for
selection.
The settings, i.e. the functions and values for hair
treatment, are selected in the configuration menus B
of a program.
The Start menu C of a program provides a list of the
most important settings
The task bar shows the two function keys for returning

into the configuration menu and for the program

start .
To start the program:
– Highlight the S
TART
press P to activate it.
USH
®
User Instructions HairMaster
hair treatment program is
and works
or to the right
).
: the designation of the
,
.

function key and then
| 751 250 / 09.2017 47