Kollmorgen
11.2
Use as directed
l
Synchronous servomotors of the Cartridge DDR series are predominantly designed
to be used as drives for rollers in printing presses, textile, foil processing and packa-
ging machines, as well as similar machines that make high demands on dynamics.
l
The user is only permitted to operate the motors under the ambient conditions
which are defined in this documentation.
l
The Cartridge DDR series of motors is exclusively intended to be driven by servo
amplifiers under speed and / or torque control.
l
The motors are installed as components in electrical apparatus or machines and can
only be commissioned and put into operation as integral components of such appa-
ratus or machines.
l
The thermal sensor which is integrated in the motor windings must be observed and
evaluated.
l
The conformity of the servo system to the standards mentioned in the EC Declarati-
on of Conformity (see Kollmorgen Website) only guaranteed when the components
(servo amplifier, motor, cables etc.) that are used have been supplied by us.
11.3
Prohibited use
l
The use of the motors in the following environments is prohibited:
- potentially explosive areas
- environments with corrosive and/or electrically conductive acids, alkaline solutions,
- directly on supply networks
l
Commissioning the motor is prohibited if the machine in which it was installed
- does not meet the requirements of the EC Machinery Directive
- does not comply with the EMC Directive
- does not comply with the Low Voltage Directive
Servomotors Cartridge DDR
04/2017
oils, vapours, dusts
Safety
English - 27