Starting The Machine; Vacuum Only Mode - POLTI EcoSteamVac DUAL Manual De Instrucciones

Tabla de contenido

Idiomas disponibles

♦

Open the monoblock socket door (9).

♦

Insert the monoblock plug (A6) of the flexible hose (A) pushing it until you hear the click of the loc-

king mechanism (A7) (fig. 6-6a).

♦

Connect the power plug to a suitable electric outlet.

Always connect to properly grounded outlet (see "Grounding Instructions", page 6).

Connecting the appliance to improper voltage may cause injury, fire, or result in damage to the

appliance. Before connecting the appliance, make sure that the voltage is the same as the volta-

ge indicated on the data label of the appliance. No adapter should be used with this appliance.

♦

Switch it ON by pressing the main switch (1): the first level of the vacuum indicator lights (5) will be-

gin to flash.

♦

You can begin to vacuum at the lowest speed by simply pressing the button (A4) on the handle

(A2).

♦

The first level of the indicator light (5) will stop flashing and remain on.

♦

Keeping the button (A4) pressed, you can select the vacuum power according to the type of

surface you are cleaning.

Level 1

Level 2

Level 3

♦

When the vacuum power is increased, an indicator light (5) will come on.

♦

When the vacuum power is decreased, the indicator light (5) will go off.

♦

To stop suction press the button (A4).

♦

When the appliance is switched on again, the vacuum level will be on the last setting used.

♦

If the water level in the dirt collection container (18) has reached the maximum level, then the va-

cuum cleaning function is automatically blocked.To resume cleaning operations, follow the proce-

dure described in the chapter "emptying and cleaning the dirt collection container", then refill wa-

ter till the required water level is reached.