Steam + Vacuum Mode; Wood-Terracotta Floor; Shortage Of Water In The Boiler Tank - POLTI EcoSteamVac DUAL Manual De Instrucciones

Tabla de contenido

Idiomas disponibles

You can use the steam and vacuum features at the same time, by activating them both as descri-

bed in the preceding paragraphs and pressing both power buttons (1) and (2).

SPECIAL WASHING FUNCTION FOR

WOOD-TERRACOTTA FLOOR

EcoSteamVac Dual has a special steam+vacuum function that can be used for cleaning wood-floor

and delicate floors.

This function involves the combined action of a delicate intermittent flow of steam with adeguate

vacuum force. Delicate surfaces must always be cleaned using the special wood-floor cloth (O3)

provided, fitted onto the universal brush (C) (Fig. D).

♦

Switch on the boiler following the instructions in paragraph "Steam only mode". As soon as the

pressure indicator lamp (4) remains on, press the boiler button (2) of the boiler again, thus acti-

vating the wood-terracotta floor function, shown by the indicator light (2A).

♦

Press the button (A5) on the handle to obtain the alternate steam dispenser cycle, and to start

vacuuming at an intermediate power (the vacuum power cannot be adjusted).

♦

Release the button (A5) to stop the steam flow, while suction will continue for about 4 seconds

more to dry the surface treated.

♦

Press the button (2) again to terminate the operation.

Prolonged use of steam may damage the wax, polish or color of wooden surfaces and trea-

ted terracotta flooring. Dispense steam only for short periods of time and always use a cloth, avoi-

ding direct steam being dispensed onto the surface. In the case of old or delicate floors, clean with

cloth steamed previously, without dispensing steam directly on the surface.

Before steaming surfaces, we recommend vacuuming up any hair or dust, using the vacuum

only function.

SHORTAGE OF WATER IN THE BOILER TANK

The shortage of water in the boiler will be signalled by the indicator light (3) and by a sound. To

continue to operate, just proceed as described in the paragraph "Safety Cap" (page 18).